Comic Book Storage Chests

by Stan Pike - furniture maker

Tel: (413) 624-7116 Or: StanPikeDesigns.com

Drawers are specially sized for comic book archival storage, sized for of all 'Ages' of comics.



Click on Pictures to see More

To Main Home Page:
Cabinet Pricing:
Comic Book Sleve Sizes:
Depth of Cabinet Vs. Drawer Capacity:

$2400                            $3000                            $2550                            $2400                            $4200

Note: Prices may vary depending on the kind of woods used.

Description:

Pricing Information:

Ordering Information

Typical Drawer Detail Drawing:

*New Economy Design*



Comic Book Storage Chest Designs

Here are some design examples.

Other designs are possible and encouraged.

 

12 drawer Comic Book Chest W=32" x H=56"

Click to see photos of this in two-toned cherry.

Click to see photos of this in walnut.

Click to see photos of this in two-toned cherry with dovetailed base.


4 drawer Comic Book Chest W=21 1/4" x H=31"


6 drawer Comic Book Chest W=21 1/4" x H=43 1/2"


6 drawer Comic Book Chest W=32" x H=31"


9 drawer Comic Book Chest W=32" x H=43 1/2"


8 drawer Comic Book Chest W=42 1/4" x H=31"


12 drawer Comic Book Chest W=52 1/2" x H=43 1/2"


16 drawer Comic Book Chest W=52 1/2" x H=56"

Click to see photos of this in natural finish ash.

Click to see photos of this in ebonized ash.



Click to see drawer details,

To see how I make my drawer pulls or knobs,



Description:

Chests may be made from a wide variety of woods although hardwoods are recommended. Mixing and matching woods for the top, sides, drawer fronts, knobs and pegs can give a wide variety of interesting looks. Secondary (inside woods) are usually #1 grade pine, basswood or poplar. All joinery is hand dovetailed, time consuming but visually appealing. All surfaces, inside and out are finely sanded and finished. Drawers are made to perfection, allowing them to slide freely with an almost airtight fit without using manufactured metal slides. I use natural finishes such as oil and wax, wax only or a special urethane blend for extra protection. Drawer bottoms are made of aromatic red cedar to repel moths and silverfish. The pieces I make will last for generations with only a little care providing safe protection for your valuable collection.

 

 

Back to Top

 

 

 

 

 

 

 

 

Typical drawer details:

 

 

Back to Top

 

 

 

 

 

 

 

 

Pricing Information for all Comic Book Storage Chests:

Price guideline is $200 X (the number of drawers) for standard Comic Book Storage Chests with a 12" - 18" depth, front to back. For depths greater than 12", an additional charge of $100 per inch is added to a maximum of 18". For example, a 12" deep 12-drawer chest would be $2400. An 18" deep chest would be $2400 + $600 = $3000.

CALL OR WRITE FOR SHIPPING QUOTES.

Ordering Information

Back to Top

To see the latest apothecary cabinet

Back to Home Page

Copyright 1999 - 2013 Stan Pike Deaigns.

 

 

 

 

 

 

 

 

Comic Book Sleve Sizes:

Current Size Comics                              6 3/4" x 10 3/8"

Standard Size Comics                            7 " x 10 3/8"

Silver/Golden Age Size Comics            7 3/8" x 10 3/8"

Super Golden Age Size Comics            7 3/4" x 10 1/2"

 

 

Back to Top

 

 

 

 

 

 

 

 

 

 

 

 

Depth of Cabinet Vs. Drawer Capacity:

Cabinets may be made any depth (Measured front to back) from 12" up to a maximum of 18". The greater the depth, the greater the drawer capacity will be. Typically 8 - 9 sleeved comics will fit per inch.

In order to figure capacity, subtract 1.43" from the overall outside cabinet depth then multiply by 8. That should give you a close estimate.

 

 

Back to Top

 

 

 

 

 

 

 

 

 

 

 

 

apothecary chest, cd storage, chests, comic book storage, comic book storage chests, dovetails, drawers, dressers, furniture, furniture designer, furniture maker, hand made, handmade, hand-crafted, hand crafted, handcrafted, tables, wood furniture